Featured: TSS RTD Link by HP Tuners
Black Friday15% off TSS kits · Nov 27–3015% off TSS kits · ends Nov 30
TSS Genuine Parts — home
System: Incorrect gear ratio (slipping)

Code P0731: Gear 1 incorrect ratio

The computer compares input and output speed and they don't match the gear it commanded: the transmission slips in that gear. It's almost always a worn clutch or band, low pressure, a solenoid or the valve body.

What's failing

Incorrect gear ratio (slipping)

Most common cause

Low or degraded fluid

Can I drive with this code?

Only as far as the shop

Diagnosis for your car

What car do you have?

Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.

Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →

Symptoms

  • Slips in firstPulling away, the engine revs up and the car doesn't move as it should.
  • Limp modeIt stays in one gear (3rd on Hyundai and Kia 4-speeds; the 62TE enters it after four errors in the same trip).
  • Transmission warning light flashing on Fords, or the D indicator flashing on Honda 5-speeds
  • On Mazda Skyactiv units the computer locks out that gear, and the check engine light doesn't always come on

Most common causes

  1. 1Low or degraded fluidMazda puts it first on its list.
  2. 2The input or output speed sensors or their harnessHyundai lists them first, and on 2011–2014 F-150s (US), P0731 with P0720 and P0722 was the output sensor in the 6R80 lead frame.
  3. 3Low pressure or a sticking valveThe pump, the valve body or a solenoid that isn't working right. Nissan says an open circuit doesn't cause it; a mechanical fault does.
  4. 4The clutch that makes first gear in your unitOn the 6R80, clutch A or D; on the 41TE and 42RLE, UD or L/R; on Nissan 4-speeds (RE4F03), the low one-way clutch; on Honda 5-speeds, the 1st clutch.
  5. 5Software, a wrong computer, mismatched tire sizes or a low battery, which Chrysler, Kia and Nissan documented in the US

From most common and easiest to check to least common.

Step-by-step diagnosis

Follow these steps

Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.

Step 1

Are other codes stored, such as speed sensor, pressure or solenoid codes?

It's guidance: a technician with a scan tool makes the final diagnosis.

See every step and resultShow
  1. Step 1. Are other codes stored, such as speed sensor, pressure or solenoid codes?Yes: «Fix the other codes first» · No: step 2
  2. Step 2. Is the fluid at the right level and in good condition, with no burnt smell?Yes: step 4 · No: step 3
  3. Step 3. Does the fluid have metal debris or a lot of clutch material?Yes: «Internal wear» · No: «Correct the fluid»
  4. Step 4. On the scan tool, are the input and output speed sensor signals good?Yes: step 5 · No: «Speed sensors»
  5. Step 5. Are all four tires the same size, and is the battery OK?Yes: step 6 · No: «Tires or battery»
  6. Step 6. At the shop, are the line pressure and the 1st-gear clutch pressure OK?Yes: «The 1st-gear clutch» · No: «Low pressure»

Results

  • Fix the other codes first. Ford, Toyota, Honda and Chrysler ask for that, and the combination points the way: on the 6R80 in the 2011–2014 F-150 (US), P0731 with P0720 and P0722 was the output sensor in the lead frame, and on a 41TE with P0732 and P0733, the suspect is the UD clutch.
  • Correct the fluid. Set the right level with the fluid the carmaker specifies and find the leak; Mazda lists low or degraded fluid first. Then clear the code and road-test.
  • Internal wear. Metal or clutch material in the fluid means internal wear: the transmission needs repair, and an additive or a fluid change won't fix it.
  • Speed sensors. A bad input or output signal causes ratio errors: Hyundai lists those sensors first. Check the sensors, their connectors and the harness.
  • Tires or battery. Match the tires or charge the battery, clear the code and road-test.
  • Low pressure. If the pressure is wrong, the problem is the pump, the valve body or a solenoid that doesn't regulate. Nissan points out this code isn't caused by an open circuit but by a mechanical fault.
  • The 1st-gear clutch. If the pressure is OK and it slips in 1st, it's the clutch or band that applies that gear: on the 6R80, A or D; on the 41TE and 42RLE, UD or L/R; on Nissan 4-speeds (RE4F03), the low one-way clutch; on Honda 5-speeds, the 1st clutch.
Diagnostic tip

Before opening the transmission, fix the other codes first (speed sensors, pressure, solenoids) and look at the combination: on a 41TE, if P0732 and P0733 are also set, the UD clutch, which works in all three gears, is the suspect. On Nissan 4-speeds, if only first fails the stall test, it's the low one-way clutch.

Can I drive with this code?

Only as far as the shop: if it slips, more driving damages that clutch further, and Ford warns it may drop into neutral or hang in one gear.

What carmaker bulletins say81 carmaker bulletins and the vehicles they nameShow

81 service bulletins published by the US NHTSA mention this code, mostly from Ford, RAM, Lincoln, Chevrolet, Hyundai (1994–2026 models). The repair they mention most: updating the computer software.

Vehicles with service bulletins for this code

  • Ford F-150 2011–2023
  • Lincoln Navigator 2011–2023
  • Ford Expedition 2011–2023
  • RAM 1500 2016–2021
  • Lincoln Aviator 2020–2023
  • RAM 3500 2019–2024
  • Chevrolet Silverado 2001–2014
  • GMC Sierra 2001–2014
Bulletin 21-055-24 · 2024
RAM 1500 2021

MIL with P0731 (gear 1 incorrect ratio), a severe bump on the 1-2 upshift at high rpm and low speed, or manual gear selection from the wheel not working. Fix: reprogram the TCM.

Open the bulletin (PDF), page 2 ↗
Bulletin 21-051-24 · 2024
RAM 4500 2019–2023 · RAM 5500 2019–2023 · RAM 3500 2019–2023

MIL with P0731-00; the transmission will not shift into or out of 1st-4th (5th and reverse still work). Replace the K1 clutch and possibly the K1 input shaft drum, only if the vehicle is inoperable from K1 failure.

Open the bulletin (PDF), page 4 ↗
Bulletin 36726.2.0 · 2024
Volvo V90cc 2024 · Volvo S60 2024 · Volvo Xc60 2024 · Volvo V60cc 2024

'Transmission performance reduced' message in the driver display with TCM DTC P073168. Fix: new TCM software.

Open the bulletin (PDF) ↗
Bulletin TJ3672610 · 2023
Volvo V90 2024 · Volvo V90cc 2024 · Volvo C40bev 2024 · Volvo Xc60 2024

'Transmission performance reduced' message in the driver display with TCM DTC P073168.

Open the bulletin (PDF) ↗

These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.

TSS parts for the transmissions in these bulletins

Buy in

Different transmission? Pick it and we'll show its parts:

See parts →

Find the part by its number on the exploded diagram: 4T80E · CD4E · 6R80

Related codes

← See all codes

Buying wholesale or own a parts store?

We'll send you a quote or tell you how to sell TSS in your area.