Reprogramming instructions for a check engine light with DTC P0736 (reverse gear incorrect ratio) stored.
Code P0736: Reverse incorrect ratio
The computer compares input and output speed and they don't match the gear it commanded: the transmission slips in that gear. It's almost always a worn clutch or band, low pressure, a solenoid or the valve body.
Incorrect gear ratio (slipping)
Low or degraded fluid
Take it to the shop using reverse as little as possible
What car do you have?
Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.
Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →
Symptoms
- Reverse slips, engages late or won't engage
- Harsh or delayed engagement into reverseFord documented it on its 10-speeds (US).
- Check engine light on; on Mazda Skyactiv units, these ratio codes don't turn on the engine light
- Limp mode on some units
Most common causes
- 1Low or degraded fluidMazda lists it first for the Skyactiv.
- 2The reverse clutchesOn the 62TE, Chrysler checks the reverse, L/R and LC clutches; on the Skyactiv, Mazda lists a burnt clutch and a leak in its circuit.
- 3Low pressure or sticking valves in the valve bodyOn the 10-speed F-150, Explorer and Ranger (US), Ford fixes harsh or delayed engagements with these codes with a computer break-in routine or a valve body repair.
- 4The speed sensors or their harness
- 5SoftwareOn the 2005 Elantra, Tucson and Tiburon (US), Hyundai fixed it by reprogramming the computer.
From most common and easiest to check to least common.
Follow these steps
Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.
Are other codes stored, such as speed sensor or solenoid codes?
It's guidance: a technician with a scan tool makes the final diagnosis.
See every step and resultShow
- Step 1. Are other codes stored, such as speed sensor or solenoid codes?Yes: «Fix the other codes first» · No: step 2
- Step 2. Is the fluid at the right level and in good condition, with no burnt smell?Yes: step 3 · No: «Correct the fluid»
- Step 3. Is there a software update for your VIN?Yes: «Software or a break-in routine» · No: step 4
- Step 4. At the shop, measured with a gauge, is line pressure in reverse OK?Yes: «Reverse clutch or band» · No: «Pump or valve body»
Results
- Fix the other codes first. Fix any speed sensor or solenoid codes first: they have their own page in this tool. Then test reverse again.
- Correct the fluid. Set the right level with the fluid the carmaker specifies and find the leak. If it's burnt or has metal debris, that means internal wear and the transmission needs an inside inspection.
- Software or a break-in routine. Ask for the reflash for your VIN. On the 10-speed F-150, Explorer and Ranger (US), Ford fixes harsh or delayed engagements with these codes with a computer break-in routine.
- Pump or valve body. If reverse pressure is low, check the pump and the valve body: low pressure or sticking valves. On those 10-speeds, Ford also fixes it by repairing the valve body.
- Reverse clutch or band. If the pressure is good and reverse slips, it's the clutch or band: on the 62TE, Chrysler checks the reverse, L/R and LC clutches; on the Skyactiv, Mazda lists a burnt clutch and a leak in its circuit. Meanwhile, use reverse as little as possible.
Measure line pressure in reverse with a gauge: if pressure is good and reverse slips, it's the clutch or band; if it's low, the pump or valve body. Fix any speed sensor or solenoid codes first.
Take it to the shop using reverse as little as possible: if the reverse clutch slips, every maneuver burns it more.
What carmaker bulletins say30 carmaker bulletins and the vehicles they nameShow
30 service bulletins published by the US NHTSA mention this code, mostly from Ford, Lincoln, GMC, Chevrolet, Hyundai (2001–2023 models).
Vehicles with service bulletins for this code
- Ford F-150 2017–2023
- Ford Explorer 2020–2023
- Lincoln Navigator 2018–2023
- Lincoln Aviator 2020–2023
- GMC Topkick 2003–2010
- GMC Sierra 2500 2001–2018
- Chevrolet Silverado 2500 2001–2019
- Chevrolet C Series 2003–2009
Harsh shifts and the transmission warning lamp on when reverse is selected, with DTC P0736 stored.
10R60/10R80: harsh or delayed engagement/shifts, with or without DTCs (P0729, P0731–P0736, P2700–P2705 etc.), from sticking valves. Run the PCM break-in routine and/or overhaul the valve body.
Open the bulletin (PDF) ↗10R140: harsh or delayed engagement/shifts, possibly with P0729, P0731–P0736, P2700–P2705 etc., from sticking valves. Report with the TEAM KAM data, run the break-in routine and/or overhaul the valve body.
Open the bulletin (PDF) ↗These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.
TSS parts for the transmissions in these bulletins
Different transmission? Pick it and we'll show its parts:
Buying wholesale or own a parts store?
We'll send you a quote or tell you how to sell TSS in your area.

