MIL with P0733-00 (gear 3 incorrect ratio), P1DA8-00 or P1D92-00. The repair is replacing the D clutch.
Open the bulletin (PDF), page 4 ↗Code P0733: Gear 3 incorrect ratio
The computer compares input and output speed and they don't match the gear it commanded: the transmission slips in that gear. It's almost always a worn clutch or band, low pressure, a solenoid or the valve body.
Incorrect gear ratio (slipping)
Low or degraded fluid.
Only as far as the shop
What car do you have?
Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.
Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →
Symptoms
- Slips in thirdThe 2-3 shift flares or engages with a bang.
- No 3rd gear; on the Escape and Fusion 6F35, if it sets with P0735, 5th won't engage either
- The problem gets worse when the transmission is hot (typical on the Explorer's 5R55W)
- Limp mode or the transmission warning light flashing on Fords
Most common causes
- 1Low or degraded fluid
- 2The speed sensors or their harnessHyundai lists them first for P0733 on its 4-speeds (A4CF1).
- 3Low pressurePump, valve body, a sticking valve or a solenoid that isn't working right.
- 4The part that makes 3rd in your unitOn the 6F35, the direct clutch or its SSB solenoid (with P0735); on the 5R55W, the intermediate band, often from servo bore wear; on the Focus 4F27E, the direct clutch (with P0734); on the 41TE, the UD and OD clutches; on Nissan 4-speeds, the high clutch (with P0734).
- 5On Ford's 4R75E (US vans and trucks), planetary gear failure, with a grinding or whining noise
- 6Software or mismatched tire sizes, documented by Chrysler in the US
From most common and easiest to check to least common.
Follow these steps
Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.
Are other codes stored, such as speed sensor, pressure or solenoid codes?
It's guidance: a technician with a scan tool makes the final diagnosis.
See every step and resultShow
- Step 1. Are other codes stored, such as speed sensor, pressure or solenoid codes?Yes: «Fix the other codes first» · No: step 2
- Step 2. Is the fluid at the right level and in good condition, with no burnt smell?Yes: step 4 · No: step 3
- Step 3. Does the fluid have metal debris or a lot of clutch material?Yes: «Internal wear» · No: «Correct the fluid»
- Step 4. On the scan tool, are the input and output speed sensor signals good?Yes: step 5 · No: «Speed sensors»
- Step 5. Are all four tires the same size?Yes: step 6 · No: «Match the tires»
- Step 6. Is there a software update for your VIN?Yes: «Update the software» · No: step 7
- Step 7. At the shop, are the line pressure and the 3rd-gear clutch or band pressure OK?Yes: «The part that makes 3rd gear» · No: «Low pressure»
Results
- Fix the other codes first. Ford, Toyota, Honda and Chrysler ask for that: speed sensor, pressure or solenoid codes are fixed first. On the 2002 Explorer built before March 2002, Ford documented no 3rd gear with P0733 and P0745. Look them up in this tool and follow their diagnosis.
- Correct the fluid. Set the right level with the fluid the carmaker specifies and find the leak; Mazda lists low or degraded fluid first. Then clear the code and road-test.
- Internal wear. Metal or clutch material in the fluid means internal wear: the transmission needs repair, and an additive or a fluid change won't fix it. On Ford's 4R75E (US vans and trucks), planetary gear failure gives a grinding or whining noise.
- Speed sensors. A bad input or output signal mimics slipping: check the sensors, their connectors and the harness before opening the transmission.
- Match the tires. Fit four tires of the same size, clear the code and road-test.
- Update the software. Ask for the reflash for your VIN, clear the code and road-test.
- Low pressure. Check the pump, the valve body, a sticking valve or a solenoid that isn't working right: Nissan points out these codes come from a mechanical fault, not an electrical one. On 5R55E, 4R44E and A4LD units built before December 2001, Ford linked P0733 to low line pressure.
- The part that makes 3rd gear. If the pressure is good and it slips in 3rd, it's that gear's part: on the 6F35, the direct clutch or its SSB solenoid (with P0735); on the 4F27E, the direct clutch (with P0734), which Ford repairs with a direct clutch kit and by checking the servo bore; on the 5R55W, the intermediate band; on the 41TE, the UD and OD clutches; on Nissan 4-speeds, the high clutch (with P0734).
Check which other ratio codes are set and cross-reference the gears: P0733 with P0735 on the 6F35 is the direct clutch; P0733 with P0734 on the 4F27E is also the direct clutch, and on the 41TE it points to the OD clutch. Fix any speed sensor, pressure or solenoid codes first.
Only as far as the shop: a slipping clutch or band burns further with every mile, and the transmission may stay in one gear.
What carmaker bulletins say77 carmaker bulletins and the vehicles they nameShow
77 service bulletins published by the US NHTSA mention this code, mostly from Ford, RAM, Lincoln, Jeep, Chrysler (1995–2025 models). The repair they mention most: checking the clutches or pistons.
Vehicles with service bulletins for this code
- Ford F-150 2004–2023
- RAM 1500 2019–2025
- Ford Ranger 1995–2023
- Lincoln Navigator 2018–2023
- Chrysler 300 2020–2023
- Jeep Wrangler 2020–2025
- Jeep Gladiator 2020–2025
- Dodge Challenger 2020–2023
MIL with P0733-00 (gear 3 incorrect ratio), P1DA8-00 or P1D92-00. The repair is replacing the D clutch.
Open the bulletin (PDF), page 4 ↗MIL with P0733-00 (gear 3 incorrect ratio), P1DA8-00 or P1D92-00. The repair is replacing the D clutch.
Open the bulletin (PDF), page 3 ↗MIL with P0733-00 (gear 3 incorrect ratio), P1DA8-00 or P1D92-00. The repair is replacing the D clutch.
Open the bulletin (PDF), page 3 ↗These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.
TSS parts for the transmissions in these bulletins
KIT DE PISTONES [3] 10R80 10L80 10L90
Juego de Empaques TSS sin Pistones 10R80
Solenoide Cambios Doble Para Harness Duro 1998/08 AODE 4R70W 4R75W
Banda Sobremarcha TSS AODE 4R70W 4R75W OEM F2TZ Ford
JUEGO DE SOLENOIDES FORD 1994/UP CD4E OEM F6RZ-7G391-AA
Banda Intermedia 42mm Ancha TSS CD4E Ford Mazda Contour
CAJA DE SOLENOIDES FORD 2004/UP RETRO 2002 5R55W 5R55S OEM 4L2Z-7G391-AA
Banda Trasera 1.84" Ancho 5R55N 5R55W 5R55S
Different transmission? Pick it and we'll show its parts:
Find the part by its number on the exploded diagram: 4R70W · CD4E · 5R55W
Buying wholesale or own a parts store?
We'll send you a quote or tell you how to sell TSS in your area.