Featured: TSS RTD Link by HP Tuners
Black Friday15% off TSS kits · Nov 27–3015% off TSS kits · ends Nov 30
TSS Genuine Parts — home
System: Incorrect gear ratio (slipping)

Code P0734: Gear 4 incorrect ratio

The computer compares input and output speed and they don't match the gear it commanded: the transmission slips in that gear. It's almost always a worn clutch or band, low pressure, a solenoid or the valve body.

What's failing

Incorrect gear ratio (slipping)

Most common cause

Low or degraded fluid.

Can I drive with this code?

Only as far as the shop

Diagnosis for your car

What car do you have?

Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.

Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →

Symptoms

  • Slips in fourthOn the shift into 4th the engine flares or the shift drags out.
  • No 4th gear; on the 6F35, if it sets with P0729 and P0735, 5th and 6th won't engage either
  • On the highway, engine rpm is higher than normal
  • Limp mode or the transmission warning light flashing on Fords

Most common causes

  1. 1Low or degraded fluid
  2. 2The speed sensors or their harness
  3. 3Low pressurePump, valve body, a sticking valve or a solenoid that isn't working right.
  4. 4The part that makes 4th in your unitOn the 6R80, clutch A or E; on the 6F35, the overdrive clutch or its SSD solenoid (with P0729 and P0735); on the 4F27E, the direct clutch (with P0733) or the 2-4 band (with P0732); on the 41TE, the OD and 2/4 clutches; on the 09G, the K2 clutch, which works in 4th, 5th and 6th.
  5. 5On the 09G, the solenoid modulator valve, checked along with the K2 clutch
  6. 6Software or a wrong computerOn the 2014 Soul (US), Kia asked to check the module part number for P0729, P0734 and P0735.

From most common and easiest to check to least common.

Step-by-step diagnosis

Follow these steps

Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.

Step 1

Are other codes stored, such as speed sensor, pressure or solenoid codes?

It's guidance: a technician with a scan tool makes the final diagnosis.

See every step and resultShow
  1. Step 1. Are other codes stored, such as speed sensor, pressure or solenoid codes?Yes: «Fix the other codes first» · No: step 2
  2. Step 2. Is the fluid at the right level and in good condition, with no burnt smell?Yes: step 4 · No: step 3
  3. Step 3. Does the fluid have metal debris or a lot of clutch material?Yes: «Internal wear» · No: «Correct the fluid»
  4. Step 4. On the scan tool, are the input and output speed sensor signals good?Yes: step 5 · No: «Speed sensors»
  5. Step 5. Is there a software update for your VIN, or does the transmission module have the wrong part number?Yes: «Software or the wrong computer» · No: step 6
  6. Step 6. At the shop, are the line pressure and the 4th-gear clutch or band pressure OK?Yes: «The part that makes 4th gear» · No: «Low pressure»

Results

  • Fix the other codes first. Ford, Toyota, Honda and Chrysler ask for that: speed sensor, pressure or solenoid codes are fixed first. Look them up in this tool, follow their diagnosis and then test again.
  • Correct the fluid. Set the right level with the fluid the carmaker specifies and find the leak; Mazda checks fluid level and condition first. Then clear the code and road-test.
  • Internal wear. Metal or clutch material in the fluid means internal wear: the transmission needs repair, and an additive or a fluid change won't fix it.
  • Speed sensors. A bad input or output signal mimics slipping: check the sensors, their connectors and the harness before opening the transmission.
  • Software or the wrong computer. Ask for the reflash for your VIN, or check that the module has the correct part number, as Kia asked on the 2014 Soul (US). Then clear the code and road-test.
  • Low pressure. Check the pump, the valve body, a sticking valve or a solenoid that isn't working right. On the AX4N through 1998, a broken clip in the valve body, the one holding the forward clutch control valve, sets P0734 and P0761.
  • The part that makes 4th gear. If the pressure is good and it slips in 4th, it's that gear's part: on the 6R80, clutch A or E; on the 6F35, the overdrive clutch or its SSD solenoid (with P0729 and P0735); on the 4F27E, the direct clutch (with P0733) or the 2-4 band (with P0732); on the 41TE, the OD and 2/4 clutches; on the 09G, the K2 clutch, checked along with the solenoid modulator valve.
Diagnostic tip

Cross-reference the ratio codes: P0733 with P0734 points to the direct clutch on the 4F27E, the OD clutch on the 41TE and the high clutch on Nissan 4-speeds; P0732 with P0734 points to the 4F27E's 2-4 band. Fix any sensor, pressure or solenoid codes first and look for software updates.

Can I drive with this code?

Only as far as the shop: if it slips in 4th, highway driving burns the clutch quickly, and the transmission may stay in one gear.

What carmaker bulletins say75 carmaker bulletins and the vehicles they nameShow

75 service bulletins published by the US NHTSA mention this code, mostly from Ford, Lincoln, Jeep, Dodge, RAM (1994–2024 models). The repair they mention most: updating the computer software.

Vehicles with service bulletins for this code

  • Ford F-150 2004–2023
  • Ford Explorer 2020–2023
  • Lincoln Navigator 2018–2023
  • Lincoln Aviator 2020–2023
  • Jeep Cherokee 2014
  • Chrysler 300 2015
  • Dodge Challenger 2015
  • Dodge Charger 2015
Bulletin 21-041-17 · 2017
Chrysler 300 2015 · Dodge Charger 2015 · Dodge Challenger 2015

TCM reprogramming (845RE and 8HP45) for P0734, P1DCD or P1B13; fixes high-rpm shift points and blocked 7th/8th after an over-the-air radio update, and harsh 2-1 downshifts.

Open the bulletin (PDF), page 2 ↗
Bulletin 21-036-16 · 2016
RAM 1500 2015

845RE TCM reprogramming for erroneous P1DCD, P1B13 or P0734; improves downshifts, low-gear upshifts and the bump during engine stop/start.

Open the bulletin (PDF), page 2 ↗
Bulletin 21-019-16 · 2016
Chrysler 300 2015 · Dodge Challenger 2015 · Dodge Charger 2015

TCM reprogramming for an erroneous MIL with P1DCD, P1B13 or P0734 (845RE and 8HP45); improves shift quality and the harsh 2-1 downshift at low speed.

Open the bulletin (PDF), page 2 ↗
Bulletin 21-019-16 · 2016
Dodge Charger 2015 · Chrysler 300 2015 · Dodge Challenger 2015

TCM reprogramming for an erroneous MIL with P1DCD, P1B13 or P0734 (845RE and 8HP45); improves shift quality and the harsh 2-1 downshift at low speed.

Open the bulletin (PDF), page 2 ↗

These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.

TSS parts for the transmissions in these bulletins

Buy in

Different transmission? Pick it and we'll show its parts:

See parts →

Find the part by its number on the exploded diagram: CD4E · 4R70W

Related codes

← See all codes

Buying wholesale or own a parts store?

We'll send you a quote or tell you how to sell TSS in your area.