Worn transmission control valve causing a gradual pressure loss: harsh shifts, a service engine soon message, reduced power or DTC P0747. A new control valve body is installed.
Open the bulletin (PDF), page 2 ↗Code P0747: Pressure control solenoid A stuck on
A fault in a pressure control solenoid (A, B or C) or its circuit: open, shorted, stuck or out of range. It causes harsh or soft shifts and often puts the transmission in limp mode.
Pressure control solenoid
Low or damaged fluid
Only as far as the shop
What car do you have?
Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.
Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →
Symptoms
- Harsh shifts, a service engine soon message and reduced powerGM documented it on 2020–2022 Silverado, Sierra, Tahoe and Suburban (US).
- The transmission sticks in one gearOn those trucks, GM describes it defaulting to 5th gear.
- On some GM 9-speeds (2018–2021 Equinox, Blazer, Traverse, Terrain and Acadia), the vehicle won't move in D or R (US)
- Check engine light on
Most common causes
- 1Low or damaged fluidHonda asks to check it for metal or clutch material.
- 2Valve body wearOn GM trucks from 2020 on, the control valve wears and pressure drops gradually; GM says that in most P0747 cases only the valve body needs replacing, and in the US it extended coverage for 2020–2022 models.
- 3Pressure control solenoid A stuck onOn Honda 5-speeds, linear solenoid A.
- 4Internal damageOn some GM 9-speeds that wouldn't move, GM found a broken clutch piston return spring at teardown.
From most common and easiest to check to least common.
Follow these steps
Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.
Is the fluid at the right level and in good condition, with no metal or clutch material?
Honda asks to check it for metal or clutch material.
It's guidance: a technician with a scan tool makes the final diagnosis.
See every step and resultShow
- Step 1. Is the fluid at the right level and in good condition, with no metal or clutch material?Yes: step 2 · No: «Correct the fluid»
- Step 2. Is it a 2020-or-later Silverado, Sierra, Tahoe or Suburban?Yes: «Valve body» · No: step 3
- Step 3. Does the vehicle move in D and R?Yes: step 4 · No: «Check inside»
- Step 4. At the shop, is the line pressure OK when measured with a gauge?Yes: «Solenoid A stuck on» · No: «Low pressure: valve body»
Results
- Correct the fluid. Set the right level with the fluid the carmaker specifies. If it has metal or a lot of clutch material, the transmission needs an inside inspection.
- Valve body. GM says that in most P0747 cases only the valve body needs replacing, and in the US it extended coverage for 2020–2022 models. Afterwards, do the relearn the carmaker requires.
- Check inside. If it won't move in D or R, it needs an inside inspection: on some GM 9-speeds (2018–2021 Equinox, Blazer, Traverse, Terrain and Acadia, US), GM found a broken clutch piston return spring at teardown.
- Low pressure: valve body. With the pressure out of range, check the valve body before replacing the solenoid or the transmission: on GM trucks from 2020 on, the control valve wears and pressure drops gradually.
- Solenoid A stuck on. With the fluid and pressure OK, the suspect is pressure control solenoid A (on Honda 5-speeds, linear solenoid A). After the repair, do the relearn the carmaker requires.
It's a performance code, not an electrical one: on recent Silverado and Sierra trucks, GM points to the valve body first. Check the fluid and measure line pressure with a gauge before replacing the solenoid or the transmission, and after the repair run the maker's relearn.
Only as far as the shop: the transmission can stick in one gear or lose pressure gradually, and with low pressure the clutches slip.
What carmaker bulletins say27 carmaker bulletins and the vehicles they nameShow
27 service bulletins published by the US NHTSA mention this code, mostly from Chevrolet, GMC, Cadillac, Buick, Hyundai (1996–2024 models). The repair they mention most: checking or replacing the valve body.
Vehicles with service bulletins for this code
- Cadillac Xt4 2019–2021
- GMC Sierra 1500 2017–2023
- Chevrolet Silverado 1500 2017–2023
- Chevrolet Equinox 2018–2020
- GMC Terrain 2018–2021
- Cadillac Escalade Esv 2017–2024
- Buick Enclave 2018–2021
- Buick Regal 2018–2020
Worn transmission control valve causing a gradual pressure loss: harsh shifts, a service engine soon message, reduced power or DTC P0747. Special manufacturer program for this condition.
Open the bulletin (PDF), page 3 ↗Worn transmission control valve causing a gradual pressure loss: harsh shifts, a service engine soon message, reduced power or DTC P0747. Special manufacturer program for this condition.
Open the bulletin (PDF), page 4 ↗Worn transmission control valve causing a gradual pressure loss: harsh shifts, a service engine soon message, reduced power or DTC P0747. Special manufacturer program for this condition.
Open the bulletin (PDF), page 3 ↗These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.
TSS parts for this code
Pick your transmission to see the TSS parts that fit it, or open all parts of this type:
Buying wholesale or own a parts store?
We'll send you a quote or tell you how to sell TSS in your area.