Featured: TSS RTD Link by HP Tuners
Black Friday15% off TSS kits · Nov 27–3015% off TSS kits · ends Nov 30
TSS Genuine Parts — home
System: Fluid pressure sensor or switch

Code P0842: Transmission fluid pressure sensor/switch A circuit low

A fault in a transmission fluid pressure sensor or switch (A, B or C) or its circuit. On many transmissions these switches sit in the valve body or the solenoid pack.

What's failing

Fluid pressure sensor or switch

Most common cause

On Mazda SKYACTIV (Mazda3, Mazda6, CX-3, CX-5, CX-9, 2012–2021), oil pressure switch No. 1 sticks from contamination entering its passage; Mazda fixes it by reprogramming the module or replacing the switch.

Can I drive with this code?

If only the light is on and the transmission feels normal, it can be driven to the shop

Diagnosis for your car

What car do you have?

Pick your car and we'll tell you which transmission it has, which TSS parts fit it for this code, and whether there are bulletins for your model.

Can't find your car, or not sure which transmission it has? We'll help you identify it. Ask us →

Symptoms

  • Check engine light on; on Mazda SKYACTIV models the AT warning light also comes on, sometimes with P0780 or P1738
  • Harsh shifts or slippingGM documented this on the 4T65-E with P0741, P0742, P0757 or P0842.
  • On the 2006-and-later 4T65-E, GM switches to an alternate shift pattern and maximum line pressure, so shifts feel firm
  • On the 2007–2009 Saturn Vue, Aura and other GM models (US), no reverse or slips in 3rd or 5th, together with P0776
  • Sometimes there are no symptomsGM published how to check the pressure switch for false codes on its 6-speeds.

Most common causes

  1. 1On Mazda SKYACTIV (Mazda3, Mazda6, CX-3, CX-5, CX-9, 2012–2021), oil pressure switch No. 1 sticks from contamination entering its passage; Mazda fixes it by reprogramming the module or replacing the switch
  2. 2The harnessOn the 2019–2020 Ascent, Legacy and Outback (US), Subaru released a new harness for when the sensor is OK and the wiring is not; on the 2020–2021 Escape (US), Ford found a harness rubbing on the steering shaft.
  3. 3The pressure switch or sensorOn the 6T70, 6T75, 6L50, 6L80 and 6L90, GM has a TFP switch check to rule out false codes.
  4. 4The valve bodyOn the 4T65-E, GM corrected harsh shifts or slips with P0842 by reconditioning it.
  5. 5An internal partOn the 2007–2009 Vue and Aura (US), GM tied it to pressure control solenoid 2 stuck off (P0776).

From most common and easiest to check to least common.

Step-by-step diagnosis

Follow these steps

Answer yes or no and we'll tell you what to check next, in the order of the carmakers' manuals.

Step 1

Is your car a Mazda with a SKYACTIV-Drive transmission?

The name changes by make: confirm the description on your scan tool. On Mazda it's oil pressure switch No. 1, sometimes set with P0780 or P1738.

It's guidance: a technician with a scan tool makes the final diagnosis.

See every step and resultShow
  1. Step 1. Is your car a Mazda with a SKYACTIV-Drive transmission?Yes: step 2 · No: step 3
  2. Step 2. Is there a transmission module reflash for your model and year?Yes: «Reflash the module» · No: «Replace both switches»
  3. Step 3. Is your car a Honda?Yes: step 4 · No: step 6
  4. Step 4. On the scan tool, does the 2nd clutch switch read ON even when the transmission isn't in 2nd?Yes: step 5 · No: «Software or computer»
  5. Step 5. With the ignition off, unplug the switch and turn the ignition back on: does the reading change to OFF?Yes: «Replace the switch» · No: «Wire shorted to ground»
  6. Step 6. Is your car a GM with a 6T40, 6T45 or 6L80 transmission?Yes: «Switch inside the module» · No: step 7
  7. Step 7. Is the 5 V supply reaching the sensor, and is the wiring OK, with no chafing?Yes: «Replace the sensor» · No: «Repair the supply or harness»

Results

  • Reflash the module. Ask the dealer to reflash the transmission module and then run the initial learning. If the code returns, Mazda replaces both switches, A and B. In Mexico, the bulletin says the repair is covered by the new-car warranty.
  • Replace both switches. Mazda replaces both pressure switches, A and B, and then runs the initial learning. Reaching them means removing the pan, and switch B sits under the strainer.
  • Software or computer. If the switch reads correctly, Honda updates the computer's software or tries a known-good one. Its diagnosis never ends in replacing the transmission.
  • Replace the switch. If the reading changes to OFF when unplugged, Honda replaces the switch. It's bolted to the outside of the transmission; on the 2003 Accord 2.4 you reach it by removing the intake duct.
  • Wire shorted to ground. If it still reads ON with the switch unplugged, find the short to ground in the wire between the switch and the computer and repair it.
  • Switch inside the module. GM explains that normal debris in the fluid can set it intermittently. On the 6L80 it runs a cleaning routine with the scan tool, with the transmission at 70–90 °C (158–194 °F), and checks that each switch changes when 2nd and 5th are commanded; if one doesn't, it replaces the module and does the relearn.
  • Replace the sensor. With the supply and circuit OK, Chrysler replaces the pressure sensor, which sits in the CVT valve body. On other transmissions, confirm on your scan tool which part it is before ordering it.
  • Repair the supply or harness. Repair the harness, connector or 5 V supply before replacing the sensor: on the 2019–2020 Ascent, Legacy and Outback (US), Subaru released a new harness for when the sensor is OK and the wiring isn't.
Diagnostic tip

The name changes by make: it's usually pressure sensor/switch A circuit low, but on the 2006 4T65-E GM uses it for the TCC release switch, and on Mazda it's oil pressure switch No. 1 stuck. Confirm the description on your scan tool; on Mazda, if there's also delayed engagement, Mazda says its reprogramming bulletin doesn't apply.

Can I drive with this code?

If only the light is on and the transmission feels normal, it can be driven to the shop; if it slips, bangs or has no reverse, better not to keep driving.

What carmaker bulletins say35 carmaker bulletins and the vehicles they nameShow

35 service bulletins published by the US NHTSA mention this code, mostly from Mazda, Subaru, Chevrolet, Pontiac, Saturn (2006–2021 models). The repair they mention most: repairing the harness, connectors or grounds.

Vehicles with service bulletins for this code

  • Mazda Mazda3 2012–2018
  • Mazda Mazda6 2014–2021
  • Subaru Ascent 2019–2020
  • Subaru Legacy 2020
  • Buick Enclave 2008–2009
  • GMC Acadia 2007–2009
  • Ford Escape 2020–2021
  • Chevrolet Equinox 2008–2009
Bulletin 16-128-20R · 2023
Subaru Legacy 2020 · Subaru Ascent 2019–2020 · Subaru Outback 2020

New transmission harness for when P0842 (fluid pressure sensor/switch A circuit low) diagnosis shows the sensor is OK but the wiring harness is faulty.

Open the bulletin (PDF), page 1 ↗
Bulletin 16-128-20R · 2021
Subaru Ascent 2019–2020 · Subaru Legacy 2020 · Subaru Outback 2020

New transmission harness for when P0842 (fluid pressure sensor/switch A circuit low) diagnosis shows the sensor is OK but the wiring harness is faulty.

Open the bulletin (PDF), page 1 ↗
Bulletin 16-128-20R · 2020
Subaru Ascent 2019–2020 · Subaru Legacy 2020 · Subaru Outback 2020

New transmission harness for when P0842 diagnosis shows the sensor is OK but the wiring harness is faulty.

Open the bulletin (PDF), page 1 ↗
Bulletin 16-128-20 · 2020
Subaru Ascent 2019–2020

New transmission harness available for DTC P0842 (transmission fluid pressure sensor/switch A circuit low).

Open the bulletin (PDF), page 1 ↗

These are US bulletins: check with your dealer or shop whether they apply to your car. Bulletins open on NHTSA's site, at the page where the repair starts.

TSS parts for the transmissions in these bulletins

Buy in

Different transmission? Pick it and we'll show its parts:

See parts →

Find the part by its number on the exploded diagram: 6T70 · 6L80

Related codes

← See all codes

Buying wholesale or own a parts store?

We'll send you a quote or tell you how to sell TSS in your area.